Equipment Engineer - China

Equipment Engineer - China
Shanghai,

Job Description

Lutron GL Electrics (Shanghai) Co., Ltd  Job Description

职能(Section):  Engineering          职务(Title): Equipment Engineer

部门(Department): Engineering   汇报对象(Reports to): Engineering Leader                                                           

REQUIREMENT 岗位要求

  1. Bachelor or higher degree in mechanical engineering;

    本科及以上机械工程/自动化背景

  2. 3+ years’ experience in tooling design or automated systems development focusing on mechanical/hardware design;

    3年以上夹治具设计经验,或者是自动化设备机械/硬件设计经验

  3. Familiar with geometric dimensioning and tolerance analysis;

    熟悉尺寸标注和公差分析

  4. Rich experience on motion control (Servo/stepper/linear), pneumatic, machine vision and sensors;

    熟练使用运动控制、气缸、机器视觉和各类传感器

  5. Previous experience on semiconductor/electrical industry automated system/equipment development would be a prominent plus

    有半导体/消费电子行业自动化/设备开发经验

  6. Experience in SMT (Fuji) and selective soldering machine (ERSA), deeply understand the process and working principle, capable to do the trouble shooting and find the count measure

    熟悉SMT(Fuji必须)与选择性波峰焊(ERSA必须), 深入理解其生产工艺和工作原理,能够针对不良现象进行分析并制定有效对策

  7. Skilled in 3D/2D design, Pro/engineer is a must, Solid works is a plus;

    熟练使用Pro/E和Solid Works进行3D/2D设计

  8. Good reading / writing English capability can directly talk with foreign colleagues via phone call and meeting;

    良好的英语读写能力,能用英语直接与美国同事进行电话或多方会议沟通

     

PRINCIPLE ACCOUNTABILITIES主要责任

Automation development and introduction自动化研发和导入:

  1. Audit and evaluate current vendor, if necessary source and qualify new vendor;

    审核和评估现有自动化供应商,如果有必要开发并审核通过新的供应商

  2. Get familiar with the SPEC from duction/requestor, convert and deliver them to vendor;

    熟悉了解需求部门的SPEC,理解并递交给供应商

  3. Guide and monitor the development process, hold the meetings with CB to review the design;

    指导并监控整个自动化开发的过程,如果需要跟CB进行周期会议讨论

  4. Qualify the pment and finish the sign-off for blue tag;

    验证设备,并释放到产线

  5. Get familiar with T&T sign off procedures and process;

    熟悉总部工装夹具和测试仪器部门的认证过程

  6. Provide the equipment WI and PM manual;

    撰写设备的WI和保养手册

  7. Document all the tooling in Agile, route the related ECN;

    维护所有文档至Agile,发起并监控完成相关的ECN

    SMT Equipment and Process

  8. Setup the SMT/AOI program, Reflow oven temperature profile, selective soldering program

    制定SMT/AOI程序,回流炉温度曲线,选择焊程序

  9. Line trouble shooting and root cause analysis, line down and scrap handling

    不良原因分析及对策,停线及废损处理

  10. Engineering change (ECN) and trial run, document SOP and visual aid

    主导工程变更和试流,编写SOP和目视管理文件

    Global Tooling Localization 全球夹治具本地化:

  11. Period communicate with CB to get the request and SPEC, deliver them to vendor

    定期跟CB沟通,取得需求和SPEC,理解并发送到供应商

  12. Guide and monitor the tooling development process, review with CB

    指导并监控整个夹治具的开发过程,并定期跟CB开会沟通

  13. Pre-qualify and deliver the tooling to CB

    预验证夹治具的功能,协助发货到CB

 

Lutron Electronics position as the leading manufacturer of lighting controls worldwide, our unsurpassed quality, the breadth and depth of our product offerings, and our commitment to servicing our worldwide customers have resulted in annual double digit growth. This growth has in turn allowed the company to continue to invest in recruiting and retaining the best people we can find to service our customers. Continuous growth has also fueled our ability to constantly develop new technologies and new manufacturing processes that in turn drive the creation of new or better products and services.

Lutron offers a competitive compensation and benefits package and a dynamic and professional work environment. We also offer continued growth through increased job responsibilities, courses offered through LutronUniversity and advancement opportunities. 

Please visit our website for more information:
English: http://www.lutron.com/en-US/Pages/default.aspx
Chinese: http://www.lutron.com/zh-TW/Pages/default.aspx

 

 

 

 

 

 

 

 

 

 

 

 

Apply Now